HP Chromebook 14a-nf0005TU
Starting this process was unsure if the model was even supported but went through it anyways.
Could not find write protect screw/pads
Managed to successfully enable CCD
Managed to partially? disable write protect using:
echo "wp false" > /dev/ttyUSB0
echo "wp false atboot" > /dev/ttyUSB0
would attach images but I can’t
'yahiko-rev10 ~ # gsctool -a -I
State: Locked
Password: None
Flags: 000000
Capabilities, current and default:
UartGscRxAPTx Y Always
UartGscTxAPRx Y Always
UartGscRxECTx Y Always
UartGscTxECRx - IfOpened
UartGscRxFpmcuTx Y Always
UartGscTxFpmcuRx - IfOpened
FlashAP - IfOpened
FlashEC - IfOpened
OverrideWP - IfOpened
RebootECAP - IfOpened
GscFullConsole - IfOpened
UnlockNoReboot Y Always
UnlockNoShortPP Y Always
OpenNoTPMWipe - IfOpened
OpenNoLongPP - IfOpened
RemoveBatteryBypassPP Y Always
I2C - IfOpened
FlashRead Y Always
OpenNoDevMode - IfOpened
OpenFromUSB - IfOpened
OverrideBatt - IfOpened
AllowUnverifiedRo - Never
CCD caps bitmap: 0x29817
Capabilities are default.
yahiko-rev10 ~ # crossystem wpsw_cur
1yahiko-rev10 ~ #’
